To Next PageTo Next Page
Need help?Do you have a question about the Sinoboom 4047E and is the answer not in the manual?
Details dimension and performance parameters for various models.
Illustrates the machine and labels its key components.
Instructions for safe operation, training, and operator responsibilities.
Covers hazards related to tipping and the machine's load capacity.
Details hazards associated with falling from the platform and safety equipment.
Details hazards associated with batteries, including charging and handling.
Lists essential checks and tasks before operating the machine.
Details inspection of parts, machine condition, hydraulics, and battery.
Steps to prepare the area and machine for function testing.
Covers tests for emergency stop, lifting/lowering, platform controller, steering, and driving.
Procedures for testing tilt protection, pothole guard, and weighing systems.
Explains use of emergency stop, lowering, and pull/drag features.
Instructions for operating on ground and platform, and driving the machine.
How to check battery level and perform charging procedures.
Procedures for changing charger curves and setting indoor/outdoor modes.
Instructions for safely lifting the machine using a forklift.
Requirements for transporting the machine using trucks or trailers.
Steps for conducting a pre-delivery inspection before the machine is used.
Guidance on adhering to maintenance schedules and completing inspection reports.
Lists of decals specific to ANSI, AS, CE, JP, KCS, CE-PL, and CSA standards.
A visual chart displaying and describing important symbols used in the manual.
General| Drive Type | Electric |
|---|---|
| Gradeability | 25% |
| Battery Voltage | 24 V |
| Max Travel Speed | 3.5 km/h |
| Ground Clearance | 0.1 m |
| Overall Height | 2.48 m |
| Stowed Height | 2.48 m |
| Tire Type | Non-marking rubber |
| Turning Radius (Inside) | 0 m |
