© Jun 2020 3-6 GTJZ0612E&0812E&1012E&1212E Operation Manual
SAFETY
UNSAFE OPERATION HAZARDS
• Do not push any object outside
the platform. The maximum lateral
force allowed is:
GTJZ0612E: 400N(90 lbf) indoor/
outdoor
GTJZ0812E: 400N(90 lbf) indoor/)
outdoor
GTJZ1012E: 400N(90 lbf) indoor/
200 N(45 lbf)
outdoor
GTJZ1212E: 400N(90 lbf) indoor/
200 N(45 lbf)
outdoor
• Do not change any machine parts
that may affect safety and
stability.
• Do not replace key parts that af-
fect machine stability with differ-
ent weights or specifications.
• Do not change or modify moving
aerial platforms without the manu-
facturer’s written permission.
• On the platform, do not attach an
additional device for placing tools
or other materials to the guardrail.
This will increase the platform
weight, surface area and load.
• Do not put ladders or scaffolding
on the platform or any part of this
machine.
• Do not use the machine on any
mobile or movable surface or ve-
hicle. Ensure all tires are in good
condition, the slotted nuts tight-
ened and the cotter pins
complete.
• Do not use a battery that weighs
less than the original lead acid
battery(30 kg [66 lb]) or lithium
battery (120 kg [265 lb]). Do not
use a battery that weighs less
than the original lead acid battery
(40 kg [88 lb]) or lithium battery
(160 kg [353 lb]) about
GTJZ1212E.The battery not only
provides power, it also serves as
a counterweight. The battery is vi-
tal to maintaining the stability of
the machine.
UNSAFE OPERATION HAZARDS
• Do not place or attach any sus-
pended load onto any part of the
machine.
• Do not use the machine as a
crane.
• Do not use the platform to push
the machine or other objects.
• Do not allow the platform to touch
nearby objects.
• Do not tie the platform onto near-
by objects.
• Do not put the load outside the
platform.
• When the platform is caught or
stuck or when other objects in the
vicinity impede its normal move-
ment, do not use the platform con-
troller to lower the platform. If you
intend to lower the platform with a
ground controller, you must oper-
ate it only after all personnel have
left the platform.
• Do not operate the machine when
the chassis door box is open.
• When one or more of the ma-
chine’s tires are off the ground,
evacuate all personnel before at-
tempting to stabilize the equip-
ment. Use a crane, forklift or other
suitable apparatus to stabilize the
equipment.
FALL HAZARDS
At a minimum, operators must operate and maintain the
machine as stated in this manual and in the Mainte-
nance Manual in addition to following more stringent in-
dustry regulations and workplace rules.
To Next Page
Loading...
