PERFORMANCE PARAMETERS
GTJZ0612E&0812E&1012E&1212E Operation Manual 1-7 © Jun 2020
Table 1-4 GTJZ1212E Specifications (continued)
MEASURE
GTJZ1212E (METRIC) 4047E (IMPERIAL)
Turning radius (outside)
2.35m 7ft 8.5in.
Rated load capacity of a single tire 1180kg
2601 lb
Max. allowable manual force (indoor/
outdoor)
400N(indoor)/200N(outdoor) 90 lbf(indoor)/45 lbf(outdoor)
Max. noise 72dB
POWER PARAMETERS
Hydraulic tank capacity
15L
3.3 gal(imperial)/4 gal(US)
Hydraulic system capacity (including tank)
34L
7.5 gal(imperial)/9 gal(US)
Hydraulic system pressure
21MPa 3046 Psi
Battery specification (quantity × voltage,
capacity)
4×6V,240Ah
System voltage
24VDC
Control voltage
24VDC
ENVIRONMENTAL REQUIREMENT
Max. allowable wind speed (indoor/
outdoor)
0 m/s(indoor)/12.5 m/s(outdoor) 0 mph(indoor)/28mph(outdoor)
Max. allowable altitude 1000m 3281ft
Allowable ambient temperature (lead-acid
batteries)
-10℃ to 40℃ 14℉ to 104℉
Allowable ambient temperature (lithium
batteries)
-20℃ to 40℃ -4℉ to 104℉
Max. allowable ambient relative humidity
90%
Storage condition
Stored at -20℃ to 50℃(-4℉ to 122℉) in a well-ventilated environ-
ment with 90% relative humidity (20℃ [68℉]), and away from rain,
sun, corrosive gas and inflammable explosive.
WEIGHT
Weight (in a no-load state) (indoor/
outdoor)
3210kg
7077 lb
Weight (in a no-load state) (indoor only) 3100kg
6834 lb
NOTE:
a) The working height adds 2m (6ft 7in) of human height to platform height.
b) In different areas, hydraulic oil, engine oil, coolant, fuel and lubrication should be added in accordance with the
environmental temperature.
c) In cold weather, auxiliary devices are needed to start the machines.
To Next Page
Loading...
