Sinoboom AB14EJ - Oil Requirements

TECHNICAL CHARACTERISTICS
GTZZ14EJ&16EJ Maintenance Manual
19
© May 2023
3.6 OIL REQUIREMENTS
NOTICE
• Please choose appropriate oil according to the
ambient temperature and local regulations, and
the use of unqualified oil will damage the machine
components.
• Oils of different grades or viscosities should not be
mixed. The oil to be added must have the same
grade and viscosity as that of the oil being used by
the machine.
• If special oil is required by the environments or
users, please contact Sinoboom.
• Before filling oil, wait until the temperature of
the machine drops to room temperature, other-
wise it may cause splashes, burns or other
personal injury.
• It is strictly forbidden to use inferior oils. The
use of inferior oils will bring damage to the ma-
chine, and the resulting failure will not be guar-
anteed by Sinoboom.
Hydraulic Oil
The hydraulic oil filled when the machine leaves the fac-
tory is generally L-HV32 or L-HM46 or other hydraulic oil
required by customers. The environment temperature
varies from region to region, so choose the hydraulic oil
suitable for your region as suggested by the following
table.
Table 3-19
Applicable
environment
temperature
amer
Mobil Shell Castrol
＞40℃
(104℉)
L-HM46 DTE 10 Excel 46 S2M46
Hyspin AWH-M46
-25℃～40℃
(-13℉～104℉)
L-HV32 DTE 10 Excel 32 TELLUS-S3VE32
Hyspin HVI-32
＜-30℃
(-22℉)
Special oil to be determined
Gear Oil
The gear oil filled in the factory usually has the viscosity
grade of 80W-90, and is suitable for use in areas with
ambient temperature range of -12～40℃ (10.4～104℉).
If the ambient temperature is beyond the applicable
range, please select other appropriate gear oil.
The ambient temperature varies from region to region,
so please choose the gear oil that suits your region ac-
cording to the recommendations in the table below.
Table 3-20
Viscosity
grade
Recommended ambient
temperature
75W-90
-40～30℃ (-40～86℉)
80W-90
-26～40℃ (-14.8～104℉)
85W-90
-12～40℃ (10.4～104℉)