Do not operate the machine if the handrails have
not been installed properly and the entrance door
has not been closed.
Hazard of Collision
Pay attention to the
range of sight and
the existence of
blind spots when
the machine is started or operated.
Please pay attention to the position of the
extendable platform when moving the machine.
Check the workspace to avoid obstacles or other
possible hazards overhead.
Beware of the hazard of squeezing when you
grab the platform guard railing.
Pay attention to observe and use the color mark
direction arrow for driving, lifting/lowering, and
steering functions on the platform controller and
chassis controller.
The user must comply with user rules,
workplace rules and government rules regarding
the Personal Protection Equipment for User.
Before the brakes are released, the machine
must be on the horizonta
l plane or has been
fixated
The platform can be lowered when there are no
people or obstacles in the lower area.
Limit travel speed according to ground
conditions, crowding degree, gradient, personnel
location, and any other factors that may cause a
collision.
Do not operate the machine on any crane or
mobile elevated line unless the crane controller
has been locked or precautions have been taken
against
any potential collision.
Do not have dangerous or careless driving
during machine operating.
Hazard of Smash and Squeezing
Do not let the hands and arms close to the
positions with shearing hazards.
No working allowed under the platform or
scissors zone when safety rod is in improper
position.
Please maintain normal judgment and plan when
you are operating the machine on the ground
with a controller. Maintain a proper dist
ance
among operator, machine and fixed object.
Hazard of Damaged Parts
Do not use any storage battery or charger larger
than 24V to start the equipment.
Do not use the machine as the ground electrode
during welding operation.
Hazard of Explosion and Fire
Do not use a machine or charge a storage battery
in a place where dangerous or flammable gas or
particles may exist.
12
GTJZ0608 & GTJZ0808 & GTJZ1012 & GTJZ1212 & GTJZ0612 & GTJZ0812 Operation Manual
To Next Page
Loading...
