E means East, W means west, 00 mean time zone.
Reply: SET OK
0-time zone is 8960000E00
7. Send location in defined time every day.
It will send to the first control number.
Command: 665+password+HHMM
HH means the hour, it from 00 to 23,
MM means minutes, it from 00 to 59.
Sample: 66500001219
Reply: SET OK
Close the function command: 665+password+OFF (default)
Sample: 6650000OFF
Reply: SET OK
8. Geo-Fence (send an alarm to the first number only)
Open Geo-Fence: 211+password
Sample: 2110000
Reply: SET OK
Close Geo-Fence: 210+password
Sample: 2100000
Reply: SET OK
Set the Geo-Fence
Sample: 0050000 1000 (the Geo-Fence is 1000 meters)
Reply SET OK
We suggest the Geo-Fence more than 1000 meters.
9. Over-speed Alarm (send Alarm to control numbers)
Command: 122+passwordBlank+XXX
Sample: 1220000 120
Reply: SET OK
The XXX is the speed, from 0 to 999, the unit is KM/H.
If the XXX is 0, it means close the over speed alarm.
10. Mileage
Set the initial Mileage
Command: 142+Password<+M+X>
To Next Page
Loading...
