To Next PageTo Next Page
Need help?Do you have a question about the Sinotrack ST-925 and is the answer not in the manual?
Obtain GPS location by calling the tracker's SIM card number or sending a specific SMS command.
Set an authorized phone number for all device SMS operations and enable voice monitoring.
Configure the device to send an alert message when a set speed limit is exceeded.
Set up the device to send a 'Shock alarm!' SMS when motion or shock is detected.
Enable or disable alerts for device removal using the anti-removal induction sensor.
Configure different operational modes like continuous work, movement-based work, or standby.
Set the device's local time, with options for different time zones.
Perform a hardware reset for the GPS tracker.
Retrieve the tracker's ID, work mode, IP, port, APN, and other configuration details.
Access tracking information via the official SinoTrack website using device ID and password.
Download and use the SinoTrack PRO mobile application for tracking on smartphones.
General| Type | GPS Tracker |
|---|---|
| Network | GSM/GPRS |
| Band | 850/900/1800/1900MHz |
| GPS sensitivity | -159dBm |
| GPS Accuracy | 5m |
| Time To First Fix | Cold status 45s, Warm status 35s, Hot status 1s |
| Operating Temperature | -20°C to +55°C |
| Storage Temperature | -40°C to +85°C |
| Waterproof Rating | IP65 |
| GPS Chip | UBLOX |
| Voltage | 12V-24V DC |
| Battery | Rechargeable battery |
