Sinotrack ST-925 - 4.3. Over-speed Alarm Setting; 4.4. Shake Alarm Setting

5
When the unit is in over-speed alarm, shake sensor alarm, or low
battery alarm, it will send alert to the admin number. (13265790180)
Admin number Canceling:
Command: D101#
Reply: SET OK!
4.3. Over-speed Alarm setting
Over-speed Alarm setting:
Command: 1220000 070（Suppose speed is 70km/h）
Reply: SET OK!
E.g:
When the unit speed is over 70km/h, it will send message “speed
alarm!” to the admin number every 5 minutes.
Over-speed Alarm canceling:
Command: 1220000 0
Reply: SET OK!
4.4. Shake Alarm setting
Command：1810000T10
Message Reply: SET OK!
E.g:
Note: Pls keep the tracker being stationary for 5 minutes, this
function will work. The tracker will send SMS “Shock alarm!” to the
admin number when the unit get shocked.
Shake alarm Canceling:
Command: 1810000T0
Reply: SET OK!