SINUS Tango Plus - 5 Accessories; Technical Specifications of the Calibrators

5 ACCESSORIES
5 Accessories
Tango_Plus achieves accuracy class 1 of IEC 61672-1:2003 in all possible device-accessories-alignments
without the necessity of applying any correction values.
Accessory Manufacturer Item number
Cal200 PCB, 1 kHz, 94 dB or 114 dB 800934.4
Type 4231 B&K, 1 kHz, 94 dB bzw. 114 dB 800043.2
Windscreen W2 MICROTECH Gefell 800253.0
USB cable A-Bmini 5 Pol 1.8 m SINUS Messtechnik GmbH 801038.7
USB power supply adaptor SINUS Messtechnik GmbH 601092.6
Equivalent electrical impedance K65 MICROTECH Gefell 800030.3
Table 5.1: Available accessories for Tango_Plus
The Windscreen W2 is black coloured and spherically with a diameter of 69 mm.
5.1 Technical specifications of the calibrators
Feature Value
Standards IEC 60942:2003 and
ANSI S1.40-1984, Class 1
Sound pressure level 94 dB, 114 dB ±0.1 dB
Supported microphone types 1/2”, 1/4”, 3/8”
Weight 156 g
Sound pressure stability <0.1 dB
Surrounding conditions each for ±0.3 dB tolerance
Static pressure 65 kPa . . . 108 kPa
Humidity 10% . . . 90% RH
Temperature -10
◦
C . . . + 50
◦
C
Table 5.2: Technical specifications Cal200
Feature Value
Standard IEC 60942:2003, Klasse 1
Sound pressure level 94 dB, 114 dB ±0.2 dB
Supported microphone types 1”,1/2”
Weight approx. 150 g
Sound pressure stability <0.05 dB
Surrounding conditions
Static pressure 65 kPa . . . 108 kPa
Humidity 10 % . . . 90 %RH
Temperature -10
◦
C . . . + 50
◦
C
Table 5.3: Technical specifications Type 4231
Manual Tango_Plus 28 of 30 SINUS Messtechnik GmbH