5
- controlling the unloading of the product;
- controlling the safety micros;
a micro, which causes the machine to stop in case the cover or discharge door opens (see FIG. n°1), does
not allow the machine to turn on if it is not in the closed position;
an N.V.R. device in the control circuit which requires the machine to be restarted if there is an
accidental lack of electricity and it enables restarting the machine only by using the START pushbutton;
Furthermore the machine is equipped with an upper transparent cover which enables checking the
working of the product in progress without any risks.
1.3 - DESCRIPTION OF THE MACHINE
1.3.1 - General description
The line of CE professional PPJ/LCJ SC has been designed and manufactured by our company with the
precise objective of guaranteeing:
- maximum safety during use, cleaning and maintenance;
- maximum hygiene, the result of the careful selection of materials which come into contact with foodstuffs
and due to the elimination of sharp edges from the part which comes into contact with the product, in
such a way to guarantee easy and thorough cleaning;
- all the components are robust and stable;
- maximum silence thanks to the belt transmission.
1.3.2 - Constructive features
Professional I PPJ/LCJ SC are made of AISI 304 steel.
The discharge door is polished aluminum; the adjustable feet are stainless steel; the cover is made of AISI
304 steel, the work plate is aluminum with the disk made of AISI 304 steel; the internal walls of the
container are in abrasive resin to enable a higher level of abrasion with the product to be worked.
To Next Page
Loading...
