Sirona C5+ Turn - Mounting Plates for Equipment with Fixed Cuspidor (Not for C5 + Turn)

Sirona Dental Systems GmbH 1 Preparations
Installation Requirements C5
+
, C5
+
Tur n
60 27 978 D3415
D3415.021.03.08.02
13
1.6 Mounting plates for equipment with fixed cuspidor
(not for C5
+
Turn)
Mounting plate
Demonstration chair plate
REF 58 26 511
REF 47 08 074
For especially uneven floor conditions, a steel mounting
plate is available to compensate for the irregularities of
the floor (REF 58 26 511).
For floors which do not permit permanent connection of the unit
(e.g. demo operation at a fair), installation on a steel demonstration
chair plate is possible (REF 47 08 074).