Sistemes Electrònics Progrés s.a. AGRONIC 2500 User Manual

33
10.2. CONSULTATION - PROGRAMS
The program consultation displays all the information related to status, sectors, and the irrigation or fertilizer
units that are pending application.
The information can be one or two screens, which mean there will be an arrow on the last line.
The first line lists the report with the program number; below is the explanation of the program status. The dif-
ferent statuses can be the following:
 Stopped, without an activation command.
 Irrigating, when activated and applying the programmed irrigation units.
 Manual start, irrigating and the program was started by a manual command.
PROGRAMS CONSULTATION
01. 02 03 04. 05.
06R 07a 08. 09. 10.
11. 12. 13. 14. 15.
16. 17. 18. 19. 20.
N. Program: 06
PROGRAMS CONSULTATION
21. 22. 23. 24. 25.
26. 27. 28. 29. 30.
31. 32. 33. 34. 35.
36. 37. 38. 39. 40.
N. Program: 00
PROGRAMS CONSULTATION
41. 42. 43. 44. 45.
46. 47. 48. 49. 50.
N. Program: 00
CON. P06
Irrigating
Sectors: 02 03
Irrigation: 01:45
Fert. 1: 00:00
Fert. 2: 00:18
↓
CON. P06
Fert. 3: 00:25
↑
Sequential of P05
When entering program consultation, the first
screen will list the first twenty programs and a sum-
mary of their status.
To the right of each program number is the status
indicated by the following symbols:
Point “.” = program inactive
R = irrigating
a = postponed
d = definitive stop
Press the down arrow key to display the following
screens (at the end it switches to sector consultation)
or the up arrow to view the previous ones (at the end it
switches to the general consultation).
To see the program full consultation, its number
must be entered and then “ENTER”; once inside, use
the “+” and “-” keys to switch between different pro-
grams.
To return to the report menus, press the “CON”
key, or the “FUN” key to return to the functions menu.
Program status:
- Stopped
- Irrigating
- Manual start
- DEFINITIVE STOP
- Postponed, filter cleaning
- Postponed, fert. overlap
- Postponed, sector limit
- Postponed, device in STOP
- Postponed, conditional stop
- Postponed, already active sector
Program in
consultation
Irrigation formats:
Time= 00:00 (hours / minutes)
Volume= 00000 m3 to 000.00 m3
Volume and time= 00000 m3 00:00
Minus
key,
to program 5
Plus
key,
to program 7
Move to see
the consultations
from the same program
Fertilizer formats:
Time= 00:00 (hours / minutes)
Volume= 00000 L to 000.00L
- Sequential of program
- Alternate start

Sistemes Electrònics Progrés s.a. AGRONIC 2500 Specifications

General

Brand	Sistemes Electrònics Progrés s.a.
Model	AGRONIC 2500
Category	Controller
Language	English