EXTERNAL MODULES
Optionally, it allows the connection to AgroBee radio modules, increasing
the extension possibilities and the use of new features. This system is based
on the ZigBee protocol operating at 868/915 MHz band. Using different mod-
ules in the product line, digital sensors, analog sensors and the meters can
be easily allocated away from the irrigation valves.
SUMMARY OF PLUS OPTION FEATURES
The PLUS option for the AGRÓNIC 2500 offers a notable increase in features to the basic model,
which may come from the factory with the options pre-activated or carried out at any time during its op-
erable lifespan to meet any new demands that arise in the installation.
In the Programs function, in addition to the classic irrigation operation based on days of the week,
there is a day frequency option, allowing irrigations to be repeated every certain amount of days,
for example, every two days, one day on, one day off, etc.
Programs with several activations separated by an amount of time in hours and minutes, allowing
a pulsed irrigation.
Programs with active schedule to limit the irrigation application within a schedule; useful when
starting irrigation by sensor.
Programs with active periods to limit the operation of each program to specific dates.
Programs with safety times (hh:mm) between irrigation starts to prevent continuous commands
orders; useful when commands are sensor activated and an incident occurs.
Uniform fertilization. The uniform application in parallel and by volume is added in order to distrib-
ute fertilizer more homogenously within the irrigation units.
New format in the irrigation and fertilization programming, in cubic meters per hectare (m
3
/ha) and
liters per hectare (L/ha), respectively. The equipment carries out the calculations for the units ap-
plied at the start of every irrigation.
Determining factors: the number of determining factors has been increased from 5 to 30. Further-
more, they can affect all the equipment or be assigned to specific irrigation programs; digital, analog
or meter sensors can be used, or the integrated data from a previous irrigation; they can cause only
a record or anomaly to be created and send off warning SMS messages. Operatives:
o Definitive stop.
o Temporary stop.
o Conditional stop.
o Start and stop irrigation programs.
o Warning.
o Modify irrigation.
o Modify fertilizer.
o Terminate due to rain.
o Filter pressure gauge.
o Diesel pressure gauge.
o Fertilizer Stop.
Text descriptions for programs, sectors, sensors and determining factors.
Possibility for 10 meters (up to 4 for fertilizers and the rest for irrigation) plus 40 analog sensors
and 20 digital sensors.
Manual commands, allowing programs to be placed out of service, to be suspended for a certain
number of hours or to be modified in order to change the days frequency meter or pending activa-
tions. In what regards the determining factors, a manual command can disable them or it can ter-
minate a definitive stop. Concerning the sectors, they can be left in automatic or manual start mode
To Next Page
Loading...