ASSEMBLY INSTRUCTIONS
5
4. Assembly instructions
Assembly must be done carefully and accurately, for the safety of the person(s) doing the
assembling and to ensure proper machine operation.
Assembly should be done on a flat, solid surface, using the proper tools and wearing suitable
clothing, making sure that all people not involved in the assembly be kept at a safe distance.
Assemblers must provide suitable lifting mechanisms and supports for stabilizing the partially
assembled units, so as to prevent them from falling and causing damage or injury. The steps for
assembly are illustrated in following. Depending on the experience of the assemblers and the
tools available, it is not necessary that the instructions be followed in the exact order given here,
but the safety precautions described above must always be followed carefully and scrupulously.
IMPORTANT
These signs and symbols give information to the operator on how to make the best use of the
machine so as to prolong life, avoid damage, optimise work and, above all, to avoid injury to the
operator and anyone within range of the machine.
4.1 Warning signs
A) Before beginning operations, read the
instruction manual carefully.
B) Before doing any maintenance or repair work,
stop the machine at a suitable spot. Turn off the
tractor motor, apply the brake, remove the key
from the ignition and consult this manual.
To Next Page
Loading...
