S PEC IFICATION S
NOTE: Bec a us e of its ongoing com m itment to product qu ality a nd innov a tion,
BRP res erve s the right, at a ny time, to m ak e c ha nges in des ign an d sp ec ifications
and/or to make additions to, or improvements in its products without imposing
any obli ga tion upon itself to install them on its produc ts previously ma nufac t ured.
MODEL 600 HO E-TEC
ENGINE SYSTEM
Engine type
Rotax™ 600 HO E-TEC, liquid
cooled w/Reed valve, 3D-RAVE™
Cylinders 2
Displ acement cc ( in
3
) 594.4 (36.3)
Bore mm (in) 72 (2.8)
Stroke mm (in) 73 (2.9)
Maxim um horsepow er RPM 8100 RPM
Carburetion Direct inject ion E-TEC
Exhaust system
Single tuned pipe, baffle m uffler
DRIVE SYSTEM
Drive pulley type TRA™ III
Driven pulley type QRS
Engagem ent 3600 RPM
Drive belt part num ber 417 300 197
(3)
Small sprocket number of teeth 25
Large sprocket number of teeth 45
Drive s procket number of teeth 8
Brake system Hydraulic, REV-XP brake type
Track nominal width 381 mm (15 in)
Track nominal length 3051 mm (120 in)
Track profile height 25.4 mm (1 in)
Deflection 30 - 35 mm (1-3/ 16 - 1-3/8 in)
Track tension
Force
(1)
7.3kg(16lb)
Track alignment
Equal distance between edges of
track guides and slider shoes
72
_________ _____________
To Next Page