Bra ke Co ndi ti on
WARNING
The brake mechanism on your
snowmo bile is an essential safety
device. Keep this mechanism i n
proper working condition. Above
all, do not operate the snowmo-
bile w i thout an effective brake
system. Periodically verify the
condition/wear of the brake pads.
Bra ke Adj ustme n t
No ad justm ent is provided for hy-
draulic brake. S ee an authorized
SKI-DOO dealer i f a ny problems.
D rive C hain Tensi on
See an a uthorized S KI-DOO dealer.
Drive Belt Inspection
Inspec t belt for c ra cks, fraying or
abnorma l wear ( uneven wear, wea r
on on e side, missing cogs, cracked
fabric). If abnormal w ea r is noted,
probable caus e could be pulley mis-
alignm ent, excessive RPM with frozen
track, fast starts without w arm -u p pe-
riod, burred or rusty sheave, oil on
belt or distorte d spare belt. Conta c t
an authorized S KI-DO O dealer.
Drive Belt Removal
Ope n LH side panel.
Remov e belt g ua rd, refer to BELT
GUARD REMOVAL/INSTALLATION.
To open the dri ve n pulley and remove
the drive b elt, first, loosen the lo cking
nut inside the driven pulley adj ustment
ring.
mmr2008-042-003_a
DRIVEN PULLEY
1. Locking nut
2. Adjustment ring
To loose n the lock ing nut, use the fol-
lowing tools from tool kit.
mmo2008-003-039
SCREWD RIVER PI N
mmo2008-003-040
WRE N CH SO CKE T 16/18 MM
Insert the s crewdriver pin into the
16 mm wrench socket.
mmo2008-003-041_a
1. 16 mm end
2. 18 mm end
3. Screwdriv er pin
Insertandsetthe18mmsocketend
on the locking nut inside the a djust-
ment ring.
_________ ____________
83
To Next Page