Ski-Doo REV Series User Manual


WARNING
– NEVER ride with the “2+1” seat installed if the rearmost
passenger’sseatisnotinstalled.
– The “2+1” seat must rest against the passenger’s seat be-
hind it to be fully locked and stable. Without the passen-
ger’sseatbehindit,the“2+1” seat is unstable and could
cause injuries to passengers.
– Never ride without the 2 + 1 seat removed, unless the rear-
most seat is installed forward immediately behind the op-
erator's seat.
2+1 Seat Removal
Pull on passenger's seat strap while gently lifting rear of seat.
A33A2YA
1
1. Strap
Slightly pull passenger's seat rearward to release alignment tab from
2+1seat.
CAUTION: If passenger's seat needs to be removed from vehicle,
make sure to unplug passenger's seat harness.
_________________________
113

Ski-Doo REV Series Specifications

General

Chassis	REV
Track Width	15 in
Fuel Capacity	10.6 gal
Seating Capacity	1
Reverse	Available on most models
Electric Start	Available on most models