2
1
A33D0BA
TYPICAL
1. Hair pin
2. Adjustment screw
Drive Belt Condition
Inspect belt for cracks, fraying or abnormal wear (uneven wear, wear
on one side, missing cogs, cracked fabric). If abnormal wear is not-
ed, probable cause could be pulley misalignment, excessive RPM
with frozen track, fast starts without warm-up period, burred or rusty
sheave, oil on belt or distorted spare belt. Contact an authorized
SKI-DOO dealer.
Check the drive belt width. Replace the drive belt if width is less
than the minimum width recommended in SPECIFICATIONS.
_________________________
185