Ski-Doo REV Series User Manual

Shifting in Reverse
All Models

WARNING
Shifting to reverse mode on these snowmobiles is done by
depressing the START/RER button when the engine is run-
ning. Wait until the reverse alarm sounds and the DESS/RER
pilot lamp comes on in the dash before operating throttle to
proceed in reverse. The reverse speed of these snowmobiles
is not limited. Always proceed with caution as fast reverse
could result in loss of vehicle stability. Come to complete
stop before depressing START/RER button. Always remain
seated and apply the brake before shifting. Ensure the path
behind is clear of obstacles or bystanders before proceeding.
With the snowmobile completely stopped and engine running at idle,
press and release the START/RER button.
The DESS
TM
/RER
TM
pilot lamp will blink and a warning buzzer will
sound once every second with a half a second duration when the
snowmobile is engaged in reverse.
Apply throttle slowly and evenly. Allow drive pulley to engage then
accelerate carefully.
Shifting in Forward
All Models
With the snowmobile completely stopped and engine running at idle,
press and release the START/RER button.
DESS/RER pilot lamp and warning buzzer will stop.
Apply throttle slowly and evenly. Allow drive pulley to engage then
accelerate carefully.
RER Modification at High Altitude
Fan Cooled Models
General
At high altitude, the RER system needs a different engine timing
curve to work properly.
Operation
Before using the reverse system, first select the altitude mode that
changes engine timing curve.
74
_________________________

Ski-Doo REV Series Specifications

General

Chassis	REV
Track Width	15 in
Fuel Capacity	10.6 gal
Seating Capacity	1
Reverse	Available on most models
Electric Start	Available on most models