Skil 3821 - Page 7

7
Safety
WARNING
“READ ALL INSTRUCTIONS” — Failure to follow the SAFETY RULES
identied by BULLET (•) symbol listed BELOW and other safety
precautions, may result in serious personal injury.
•
Do not allow familiarity gained from frequent use of your miter saw to become
commonplace.
Always remember that a careless fraction of a second is sufcient to inict
severe injury.
•
THINK SAFETY! SAFETY IS A COMBINATION OF OPERATOR’S COMMON SENSE,
KNOWLEDGE OF THE SAFETY AND OPERATING INSTRUCTIONS AND ALERTNESS AT
ALL TIMES WHEN THE MITER SAW IS BEING USED.
WARNING
THE WARNINGS SHOWN BELOW CAN BE FOUND ON YOUR TOOL.
THESE WARNINGS ARE ONLY A CONDENSED FORM OF THE MORE
DETAILED SAFETY RULES AND PRECAUTIONS THAT APPEAR IN YOUR OWNER’S
MANUAL. THEY SERVE AS A REMINDER OF All SAFETY RULES NEEDED FOR SAFE
OPERATION OF THIS MITER SAW.
LASER
2
IEC 60825-1:2014
DESIGNATED DANGER ZONE.
AVOID POSITIONING HANDS,
FINGERS OR ARMS IN THE
AREA DESIGNATED BY THIS
SYMBOL.