RADIO selector key 19
Note
• If “memory” appears at the top left of the touch-screen, you can only change
over to the stations stored in the memory list with the help of the arrow keys.
Storing a radio station
Storing a radio station on a displayed station key
– Continue to press one of the six station keys to displayed in
the main menu RADIO until a signal tone sounds. The currently heard
radio station is then stored on this station key.
Storing a radio station
– Press the function key in the main menu RADIO to open the
memory list ⇒ page 18, fig. 7.
– Press the function key to ensure that the displayed radio station
(Example: “Radio 2”) is safely stored in a memory space.
– Select a memory space from the list by pressing the respective key in
the menu select memory space. If a memory space is selected, which
already holds a radio station, it will be overwritten.
Deleting a radio station from the memory list
–Open the memory list.
– Press the function key behind the station you wish to delete.
– Confirm the safety interrogation by pressing to remove the
station finally from the memory list.
Calling up a stored radio station
If the currently heard radio station is already stored in the memory list, the
memory space number is displayed behind the description of the
frequency range (FM or AM).
Calling up a station via the station keys
– Briefly press one of the six station keys to displayed in the
main menu RADIO until a signal tone sounds.
Calling up a stored stations from the memory list
– Press to open the memory list.
– Press the display of the desired station in the memory list.
RDS function
RDS (“Radio Data System”) serves to transmit program identification and additional
services therefore also enabling automatic tracking of stations.
In the event of sufficiently satisfactory reception the suitable RDS radio stations will
display the station name instead of the station frequency.
If a radio station sends additional information via the RDS function while a station
is being stored, it can occur that the name of the radio station is later displayed
incorrectly in the memory list.
Changing station name
You can manually adapt the station name.
Choose the stored radio station and wait until the correct name is displayed on the
touch-screen. Continue to press on the display of the station name between the
arrow keys until “Station name stored” is displayed.
1 ... 6 ...
Memory
Save
Delete
1 ... 6 ...
Memory
s2u4.6.book Page 19 Wednesday, August 13, 2008 7:57 AM
To Next Page
Loading...
Need help?
General
