Selector key NAV (Navigation)42
Entering a destination: Select a destination
Overview for destination selection
Menu New destination call up
– Press on the selector key to call up the main menu Navigation.
– Press on the function key to call up the menu New
destination.
Information regarding destination selection
A travel destination is only taken over into the destination memory if route guid-
ance to this travel destination has been started once or if the travel destination has
been directly stored in the destination memory. The destination information
already provided will be forgotten if, for example, it has been changed over to a
different type of destination selection.
New route guidance is started with the function key . The display of the func-
tion key changes to . Route guidance can be terminated by pressing this func-
tion key.
New destination: Select a new travel destination
– Address entry via an input mask for selecting a destination address
⇒ page 42.
– opens a search mask to search for a special destination from a certain cate-
gory or by entering a name or a phone number. You will determine the current loca-
tion of a search area, enter a town or select a point on the map. During route guid-
ance you can also determine a point along the route or the destination area as a
search area ⇒ page 43.
– Select a point on the map as a travel destination ⇒ page 44.
New destination: Selecting a travel destination from the destination memory
– select a previously entered and stored home address as destination – or
define home address.
– open the list of the last travelled destination and start route guid-
ance to one of the displayed travel destinations by pressing ⇒ page 45 – or store
the displayed Last destinations.
– open the list of the stored travel destinations which have previously
been defined as “Favourite destinations” ands start route guidance to one of the
defined travel destinations by pressing ⇒ page 45 – or processing “Favourites”.
– open list of the stored travel destinations and start route
guidance to one of the defined travel destinations ⇒ page 45 – or modify “Destina-
tion memory”.
Selecting a destination address
In the menu New destination, press on the function key .
Selecting a destination address
– Select the destination address in the menu Address entry.
– Press on one of the left function keys , , ,
or , to open the corresponding input mask. A destination
address must always be selected in the displayed sequence, first of all
the country, then the town and so on.
– If the information is sufficent for route guidance, the function key
will be active.
Changing the displayed destination address
– If a travel destination has previously been defined, it will be displayed
in the menu Address entry. You need then only change the entries
differing from the desired destination address.
Further function keys
The function keys and will only become active once a town has been
selected.
NAV
New destination
Start
Stop
Address
POI
Map/GPS
Home
Last destinations
Favourites
Destination memory
Address
State City/ZIP Street Number
Corner
Start
Save Start
s2u4.6.book Page 42 Wednesday, August 13, 2008 7:57 AM
To Next Page
Loading...
Need help?
General
