Selector key NAV (Navigation) 39
– If the corresponding message appears, press the key or press the
function key and take out the navigation DVD. Active route guid-
ance is interrupted and must be restarted.
Updating navigation data in the unit
– If the data of the navigation DVD is not identical to that stored in the
navigation memory of the unit, a corresponding message will be
displayed.
– Press on the function key to overwrite the data in the navigation
system memory of the unit with the data from the navigation DVD.
Using the data of a navigation DVD for a short period of time
– If you leave the stored area map in the navigation memory of the unit
for only a short period of time, insert the navigation DVD for the area
to be driven.
– Press on the function key and leave the navigation DVD in
the unit. The unit uses only the data from the navigation DVD for the
navigation.
– If you are again in the area of the map material stored in the navigation
memory, press the key to take out the navigation DVD.
Storing the navigation data can take up to one hour. Route guidance will start via
the navigation DVD while the navigation data is being stored. Please note that route
guidance will be interrupted if the navigation DVD is taken out. Route guidance
must then be restarted with details supplied from the navigation system memory
of the unit.
Up to date navigation data and new navigation DVD
Road guidance is subject to constant changes (e.g. new streets, changes of street
names and house numbers). A navigation DVD is a huge data store, which unfortu-
nately will not be up to date after a certain time. This can lead to complaints during
route guidance.
It is for this reason that you must regularly update the navigation data on your unit
with a current navigation DVD.
Input windows of the navigation system
Selecting a destination from the list
– If you press on the function key after opening the input mask, a list
will open with all the destinations containing the relevant parameters
selectable from the navigation memory (e.g. and ).
– If need be, move the sliding regulator to the right edge of the touch-
screen for all entries in the list to be displayed.
– Press the desired entry in the list to take it over for the address.
Limiting the destination and selecting from the list
– You can open a list of the selectable destinations any time by pressing
the function key behind the entry line while making entries in the
entry line. Only destinations selectable from the navigation memory
will be displayed and which correspond to the requirements and the
character sequence in the entry line.
– The number of selectable destinations will be displayed in the func-
tion key if fewer than one hundred destinations can be selected.
–If fewer than six destinations are selectable, the entry window will
close automatically and a list of possible destinations will be
displayed.
Eject
Save
Te mp ora ry
State City
**
**
s2u4.6.book Page 39 Wednesday, August 13, 2008 7:57 AM
To Next Page
Loading...
Need help?
General
