Selector key PHONE 67
Editing field: further input possibilities
– changes from upper case to lower case and vice versa.
– opens the editing field for the entry of digits and special characters. The
button changes to . Press on , to change again to the letter editing field.
– space key for inputting spaces.
or – moves the cursor in the entry line to the left or right.
– deletes characters in the entry line from right to left, starting from the position
of the cursor.
Phone conversation
If you have started the process of connecting to a call number or
accepted a call, the main menu PHONE will change to the display Phone
conversation.
Incoming phone call
– An incoming phone call will be displayed on the touch-screen by
“Incoming call” followed by the call number of the caller. If the
number of the caller is stored in the phone book, the name of the
caller will be displayed instead of the call number.
– Press the function key to accept the call.
– Press the function key to reject the call.
During a phone conversation
– If you press the function key during a phone conversation the
current conversation will be switched to “mute” (Display: “Call is
held”). This means that the connection remains intact while the audio
transmission is interrupted.
– If you press the function key , again the conversation can be
continued.
– If you press the function key , during a phone conversation, the
connection to the current call number will be terminated and the unit
will change to the main menu PHONE.
Carrying out an additional phone conversation
– Press on the function key during a phone conversation to put the
current conversation on “hold” as described above.
– Select a new call number or select a stored call number.
– If you are holding an additional conversation, you can switch between
both parties (“alternate”).
“Call waiting” and changing between two parties (Alternate)
– If you are called while holding a conversation, the number and the
name of the caller will appear below the current conversation on the
touch-screen (Function: “Call waiting”).
– Press on the function key in the line “Incoming call” to reject the
second call.
– Press on the function key in the line “Incoming call” to accept the
second call. The connection to the first party will be interrupted but
not broken (Display: “Call is held”).
– If you press the function key in the line “call is held”, the conver-
sation with this party will continue and the other party will be “put on
hold”. In this way you can alternate between two parties.
– Press the function key , to break the connection to the call number
displayed in this line.
DTMF key tones
Each key of a phone is assigned a particular DTMF (Dual-tone Multi Frequency =
Key tone); DTMF key tones are used for, for example, the input of a password via the
phone or for selection of a colleague in a “Call center”.
A-Z A-Z
s2u4.6.book Page 67 Wednesday, August 13, 2008 7:57 AM
To Next Page
Loading...
Need help?
General
