sks BS 2012 - Mounting Instructions; Preparation

SKS-Kinkel Elektronik GmbH
EN
BS 2012 Audio receiver
Support-Hotline: +49 (0) 2661 98088 112
- 17 -
Version: 1.0
E-Mail: support@sks-kinkel.de
Document art. no. 97011300
3 Mounting instructions
3.1 Preparation
Use a screwdriver to release the indoor station from its supporting
frame. This is done by inserting the screwdriver into the release
opening at the bottom of the indoor station.
Carefully remove the indoor station from the support frame as shown
in the drawing.
Pull the lower part of the indoor station towards you and carefully lift it
upwards.