9
Locating the Kiln
● Locate your kiln near your present electrical outlet or where a new circuit can be installed.
Position the kiln to the left of your electrical outlet so the cord will have an easy run and will not
place a strain on the plug or outlet.
● Install it in a well ventilated, sheltered area such as a carport, garage, utility or hobby room.
Allow a MINIMUM 18 inches (46 cm) of space between your kiln and adjacent walls, other
kilns, shelving, etc. When multiple kilns will be installed in the same room, make sure the control
controller.
●
●
●
before installing. Be sure temperature rating of sprinkler heat detector will be adequate for
normal operation of kiln at peak temperature.
● All kilns are vulnerable to the highly corrosive effects of marine air. If you live near salt water,
locate the kiln indoors and protect it from the damp air.
18 "
Kiln
18 "
Kiln
18 "
18 "
Envirovent 2
Example of Typical Installation
Fan
Shelving
10' (3.1m)
To Next Page
Loading...
