12© 2022 Skydio, Inc. All rights reserved.
Skydio Enterprise Controller
PRE-FLIGHT
Step 1 — Open the controller
• the antenna is embedded in the controller
lid—use caution when opening
Step 2 — Power on
• hold the power button for 3 seconds
Step 3 — Activate Skydio Enterprise app
Follow the on-screen prompts to get started with the Skydio Enterprise app.
Connect to the Internet and enter your email address to activate the controller. Enter the
activation code you received from Skydio.
Set a password to unlock your Skydio Controller every time you power on or wake it from a
sleep state.
WARNING: The password cannot be recovered or reset. Ensure that your pass-
word is entered correctly and is written down and stored in a safe location. If the
password is lost, the controller will need to be replaced.
To Next Page
Loading...