Page 5SJ 600, 800 & 1000 Series
122883AH
May 2002
SERVICE POLICY AND WARRANTY
SKYJACK, Inc. warrants each new work platform to be free of defective parts and workmanship during the first
12 months. Refer to Warranty Statement on Page 6 for details.
NOTE
SKYJACK, Inc. is continuously improving and expanding product features on it’s equipment: therefore,
specifications and dimensions are subject to change without notice.
This Safety Alert Symbol Means Attention!
Become Alert! Your Safety Is Involved.
The Safety Alert Symbol identifies important safety messages on machines, safety signs, in manuals, or else-
where. When you see this symbol, be alert to the possibility of personal injury or death. Follow the instructions
in the safety message.
SCOPE OF THIS MANUAL
This manual applies to the ANSI/SIA, CSA and CE versions of the SJ-600, SJ-800 and SJ-1000 Series work
platform models listed in Table 1-1. Equipment identified with “ANSI/SIA” meets the ANSI/SIA-A92.6-1999 standards.
Equipment identified with “CSA” meets the CAN3-B354.2 & .3-M82 standards. Equipment identified with “CE”
meets the requirements for the European countries, i.e. Machinery Directive 89/392/EEC and EMC Directive 89/
336/EEC and the corresponding EN standards.
DO NOT OPERATE THIS EQUIPMENT WITHOUT PROPER
AUTHORIZATION AND TRAINING. DEATH OR SERIOUS
INJURY COULD RESULT FROM IMPROPER USE OF THIS
EQUIPMENT!
To Next Page
Loading...
Need help?
General
