EasyManuals Logo

Skyjack SJ16 Operating Manual

Skyjack SJ16
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
Function Tests Section 2 - Familiarization
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the aerial platform.
FAMILIARIZATIONFAMILIARIZATION
FAMILIARIZATIONFAMILIARIZATION
Outdoor Option Flashing
Light (If Equipped)
Test All Motion Alarm (If Equipped)
WARNING
Be aware of overhead obstructions or
other possible hazards around the MEWP
when lifting.
1. Ensure path of intended motion is clear.
2. Activate any drive or lift functions.
Result: Alarm should sound.
3. Stop all platform motion.
Result: Alarm should stop.
NOTE
On MEWP with certain options, a flashing amber
light will accompany this alarm.
Test Outdoor Option Flashing Light (If
Equipped)
In no wind conditions (0 m/s), attempt the
following:
1. Raise the MEWP to 3.6 m (12 feet).
Result: Indicator light should flash.
2. Lower the MEWP below 3.6 m (12 feet).
Result: Indicator light should stop flashing.
WARNING
Do not operate the MEWP at a height
exceeding 3.6 m (12 feet) if wind
conditions exceed 0 m/s.
Flashing Light
(If Equipped)
Page 30
Vertical Mast
TM

Other manuals for Skyjack SJ16

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Skyjack SJ16 and is the answer not in the manual?

Skyjack SJ16 Specifications

General IconGeneral
Gradeability25%
Drive Motor24V DC
Max Gradeability25%
Platform Height16 ft
Lift Capacity500 lbs
Machine Width0.76 m
Overall Width0.76 m
Drive Speed (Stowed)4.8 km/h
Drive Speed (Raised)0.8 km/h
Turning Radius (Inside)0 in
Power Source24V DC Electric

Related product manuals