Skyjack SJ40 T+ - Hydraulic Specifications

41
SJ40 T+, SJ45 T+ 238273AAA
2029AB
Description TBD Metric US
Pumps
Drive Pump
Displacement - 2600 rpm 46 CC 2.8 CIR 30 gpm @2600 rpm
Drive Pump Pressure 345 bar 5000 psi
Charge Pump Displacement 13.9 CC 0.85 CIR
Charge Pump Pressure 22 bar 313 psi
System Pump
Displacement - Static 30 CC 1.83 CIR / 20.6 gpm @ 2600 rpm
System Pump Pressure 150 bar 2175 psi
Filters
Charge Pump Filter Max. Operating Pressure 9 µm/35 50 psi
High Pressure Filter Max. Operating Pressure 10 µm/25 87 psi
Return Filter Max. Operating Pressure 10 µm/60 25 psi
Motors
Drive Motor
Displacement - Low 25 CC 1.55 CIR / 15.2 gpm @ 2600 rpm
Displacement - High 38 CC 2.32 CIR / 22.8 gpm @ 2600 rpm
Swing Motor
Motor Displacement 65.56 CC 4 CIR / 39.4 gpm @ 2600 rpm
Maximum Swing Pressure 96 bar 1400 psi
Cylinders
Extension Cylinder
Bore 6.4 cm 2-1/2 in
Rod Diameter 4.1 cm 1-5/8 in
Stroke 445 cm 175 in
Max. Operating Pressure 210 bar 3050 psi
Lift Cylinder
Bore 10.2 cm 4 in
Rod Diameter 7.6 cm 3 in
Stroke 152 cm 60 in
Max. Operating Pressure 210 bar 3050 psi
Steering Cylinder
Differential Area 7.8 cm 3-5/64 in
Stroke 10.9 cm 4-5/16 in
Maximum Steering Pressure 145 bar 2103 psi
*For other component specifications, refer to the hydraulic schematic.
2.10 Hydraulic Specifications
To order go to Discount-Equipment.com