EasyManuals Logo

Skyjack SJ68RT Series Operating Manual

Skyjack SJ68RT Series
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #47 background imageLoading...
Page #47 background image
Rough Terrain Scissors
December 2007 Page 47
Section 3 - Operation Start Operation
3.8-5 To Drive Forward or Backward
WARNING
Be aware of blind spots when operating
the MEWP.
WARNING
Ensure that there are no personnel
or obstructions in the path of travel,
including blind spots.
1. Activate platform controls (refer to
Section 3.8-3).
2. On platform control console, select lift/drive switch
to “
” drive position.
3. Activate and hold “ ” enable trigger switch.
4. Move controller handle “ ” forward or
” backward to desired speed and direction
of platform travel.
5. Return controller to neutral center position to stop.
Release “ ” enable trigger switch.
WARNING
To protect against unintended movement
of the MEWP, push in the emergency stop
button after you have arrived at your
desired location or elevation.
3.8-6 To Steer
1. Activate platform controls (refer to
Section 3.8-3).
2. On the platform control console, turn lift/drive switch to
” drive position.
3. Activate and hold “ ” enable trigger switch.
4. Press “ ” rocker switch on top of controller
handle in either direction to steer.
NOTE
Steering is not proportional. Driving and
steering may be active at the same time.

Other manuals for Skyjack SJ68RT Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Skyjack SJ68RT Series and is the answer not in the manual?

Skyjack SJ68RT Series Specifications

General IconGeneral
BrandSkyjack
ModelSJ68RT Series
CategoryScissor Lifts
LanguageEnglish

Related product manuals