Rough Terrain Scissors
December 2007 Page 27
Section 2 - Familiarization Visual & Maintenance Inspection
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the aerial platform.
• Tie Rod
- Ensure there are no loose or missing
parts, tie rod end studs are locked and
there is no visible damage.
• Ladder
- Ensure there are no loose or missing
parts and there is no visible damage.
• Outriggers (If Equipped)
- Ensure there are no loose or missing
parts and there is no visible damage.
2.3-12 Manuals
Ensure a copy of operating manual, manual
of responsibilities and ANSI/CSA certificate are
enclosed in manual storage box.
- Check to be sure manual storage box is
present and in good condition.
- Ensure manuals are legible and in good
condition.
- Always return manuals to the manual
storage box after use.
Wheel/Tire
Assembly
Steer Cylinder
Assembly
Tie Rod
Typical Model 71xx shown - Bottom View
Base
Weldment
Manual Storage
Box
Ladder
Drive Axle
FAMILIARIZATIONFAMILIARIZATION
To Next Page
Loading...
