Skyjack SJ9250 RT - Tire Specifications

Page 70 December 2007
Rough Terrain Scissors
Tables Section 4
Table 4.7 Tire Specifications
WARNING
Air pressure can affect stability. Temperature changes can affect air pressure. It is important to
inspect all tires for proper tire inflation prior to use. Tires must be checked by end user on a daily
basis. Tire inflation pressures must be checked weekly with a calibrated gauge. If the measured
pressure is less than the specification, reinflate to the pressure specified below. Tires must not
be inflated above the recommended specification. Do not intermix tires of different types on one
aerial platform. Use only tires of type originally supplied.
7127 7135 8831 8841 9250
10-16.5 75*
CARLISLE US LOADER
(517.1)*
10-16.5 OTR OUTRIGGER 75*
(Non-Marking)
(517.1)*
31-15.5-15 45*
GOODYEAR TERRA XTRAC
(310.3)*
10-16.5
CARLISLE US LOADER
10-16.5 OTR OUTRIGGER
(Non-Marking)
31-15.5-15
GOODYEAR TERRA XTRAC
60378AG-ANSI-R
*
†
O
OO
O
(N/A) Not Available
OO
Factory preset @ 20°C, Check pressures regularly as tires can lose pressure over time and over different ambient
temperatures even under normal conditions.
Usage: (S)tandard Or (O)ptional
OOO
OO
O
#6F
Foam
10 N/A
#7F 8 N/A
#6F 10 N/A
OOO
OOO
OO
OOOOO
SSSSS
Tire Size
#6A
Air
10
#6A 10
#7A 8
Fill Specification
Pressure (Factory)
(kPa)
Usage†
Fill
Type
Ply
Rating
MID SIZE FULL SIZE
Backspace
Outboard
Inboard
SECTION A-A
A
A
Rim Backspace Diagram
3-
3
/
4
” 4-
3
/
4
” 4-
3
/
4
” 3-
3
/
4
”
95 mm 121mm 121mm 95 mm
#7 & #7F
60380AD-ANSI
7135
Contact Skyjack Service
Department
Backspace
All models are 4-3/8”
3-
3
/
4
”
8831 8841 9250
#6 & #6F
Rim Size
Serial Number
7127
95 mm
WARNING
Intermixing tires of different types or using tires of types other than those originally supplied with
this equipment can adversely affect stability. Therefore, replace tires only with the exact Skyjack-
approved type. Failure to operate with matched approved tires in good condition may result in
death or serious injury.