SkyLink DIAL-ALERT AD-433S - Table of Contents; Package Contents; A. Storing Telephone Numbers in Memory

TABLE OF CONTENTS
PACKAGE CONTENTS............................................................................................4
...
OVERVIEW.........................................................................................................5
INSTALLATION.......................................................................................................................6
LIGHTS AND SOUNDS.........................................................................................................9
STANDARD PROGRAMMING...................................................................................10-14
-Program the Time Clock...............................................................................................10
-Recording a Message....................................................................................................10
-Playback Pre-recorded Message................................................................................11
-Storing Telephone Numbers.........................................................................................11
- A. Storing telephone numbers in memory
(Sends the emergency voice message only)......................................11-12
- B. Storing telephone numbers in memory
(Sends both emergency voice message and numeric information)........12
- C. Storing telephone numbers in memory
(Sends the numeric information to pager only)..............................................13
-Delete A Telephone Number From Memory...............................................................13
-To Review or Modify the Pre-programmed Phone Numbers, The
Redial Count and/or The Repeat Times of a Phone Number...............................14
-Activate the Dial-Alert with The Panic Button on the Keypad...............................14
ADVANCED PROGRAMMING...................................................................................15-20
-Program the calling time...........................................................................................15
-Programming a Pause Period...........................................................................15
-Set the type of Phone System.....................................................................................16
-Program the ID Code of a Transmitter....................................................................17
-Delete Programmed Transmitters/Sensors/Security Systems......................17
-To Arm/Disarm the Dialer.....................................................................................18
-Delay Dialing (Entry/Exit Mode)................................................................................18
-Universal Dial Tone..............................................................................................19
-Dial Sequence Setting.....................................................................................20
CONNECT THE DIAL-ALERT WITH YOUR EXISTING ALARM SYSTEM............21
QUICK GUIDE.........................................................................................................22
BATTERY MAINTENANCE.................................................................................23
-Dial-Alert...........................................................................................................................23
ADDITIONAL ACCESSORIES................................................................................24-26
–
3
–
–
4
–
All materials required for installation are included with this package
1 Dial-Alert (AD-433S)
1 Telephone Line
1 antenna (installed)
1 AC adapter
1 9 volt alkaline battery
1 Pack of screws and anchors (for Dial-Alert)
One template
Double sided tape
User's instructions
Warranty Card
Quick Guide
PACKAGE CONTENTS