Skyrc D100 - Specification; Technical Specifications List

Specification
DC Input Voltage : 11-18V AC Input Voltage: 100-240V
Display Type: 128x64 LCD Display Backlight: Cool White
Case Material: Plastic Controls: Five Buttons
Case Size: 153x140x67mm Weight: 668g
DC Power Supply Output: 13.8V / Max. 100W
PC Communications: USB Port for PC Control & Firmware Upgrade
External Port: 2-6S Balance Socket-XH, Temperature Probe Socket,
Battery Socket, AC/DC Input, DC Output, Micro USB
Port for PC, 5V-2.1A USB Output.
Delta Peak Detection for NiMH/NiCd: 3-15mV/cell / Default: 4mV/cell
Charge Cut-off Temperature: 20ºC/68ºF-80ºC/176ºF(adjustable)
Charge Voltage: NiMH/NiCd: Delta peak detection
 LiPo: 4.18-4.25V/cell LiIon: 4.08-4.2V/cell
LiFe: 3.58-3.7V/cell LiHV: 4.25-4.35V/cell
Balance Current: 300mA/cell
Reading Voltage Range: 0.1-26.1V
Battery Types/Cells: LiPo/LiIon/LiFe/LiHV: 1-6cells
NiMH/NiCd: 1-15cells
 Pb: 2-20V
Battery Capacity Range: NiMH/NiCd: 100-50000mAh
LiPo/LiIon/LiFe/LiHV: 100-50000mAh
Pb: 100-50000mAh
Charge Current: (0.1A-10.0A) x2
Safety Timer: 1-720minutes / OFF
Charge Wattage: AC 100W(Support Power Distribution) DC 100Wx2
Discharge Current: (0.1A-2.0A) x2
Discharge Cut-off Voltage: NiMH/NiCd: 0.1-1.1V/cell
LiPo: 3.0-3.3V/cell LiIon: 2.9-3.2V/cell
LiFe: 2.6-2.9V/cell LiHV: 3.1-3.4V/cell
Pb: 1.8-2.0V/cell
Discharge Wattage: 10Wx2
Balance Cells: 2-6 cells
Memory: 10x2 Different Charge/Discharge Profiles
Charge Method: CC/CV for Lithium Types and Lead (Pb) Batteries
Delta-peak Sensitivity for NiMH/NiCd.
· 38
D100v2