03 ·
Twin-channel Charger
SKYRC D100v2 allows you to plug 2 batteries into one charger simultaneously, and it will
intelligently and automatically charge 2 battries at once to their maximum capacity. To top
of it, the batteries being charged do not even need to have the same configuration. You
can connect different chemistry(LiPo/LiFe/Lilon/LiHV/NiMH/NiCd/Pb)batteries into any of
the charging ports.
Dual Input and Power Distribution
Optimized Operating Software
SKYRC D100v2 features the so-called AUTO function that sets the feeding current during
the process of charging or discharging. Especially for lithium batteries, it can prevent the
overcharging which may lead to an explosion due to the user's fault. It can disconnect the
circuit automatically and alarm once detecting any malfunction. All the programs of this
product were controlled through two way linkage and communication, to achieve the
maximum safety and minimize the trouble. All the settings can be configured by users!
Special Features
DC Power Output Supported
With the unique feature of DC power source, the user does not have to carry additional big
and heavy power supply to the racing track or flying filed.
The input of the charger is AC 100-240V and DC 11-18V. In DC mode, the power of each
channel is 100W. Total power is 200W.
In AC mode, it supports power distribution, between Channel A, Channel B & Power
Supply. For example, if both channel A and channel B are set to 40W, then, the DC power
is 20W. The total power is 100W. (40W+40W+20W=100W)
To Next Page
Loading...
