SETTING
0
F /
0
C SCALE
The factory setting for temperature is
0
F. To change this setting to
0
C, first press and
hold the ON button and the FLAME ICON on the transmitter LCD screen at the same time
for (5) seconds. Follow this same procedure to change from
0
C back to
0
F.
CHILDPROOF “LOCK-OUT”
This remote control includes a CHILDPROOF “LOCK-OUT” feature that allows the user to
“LOCK-OUT” operation of the appliance from the TRANSMITTER when it is in the “LOCK OUT” mode.
SETTING “LOCK-OUT”
1. To activate the “LOCK-OUT” feature, press and hold the ON and OFF icons on the LCD
screen together, for 5 seconds. The lock icon will appear on the LCD screen.
2. To disengage the “LOCK-OUT”, press and hold the ON and OFF icons on the LCD screen
together, for 5 seconds. The lock icon will disappear on the LCD screen and the system
will return to its normal operating condition.
NOTE: If the appliance is already operating in the ON mode engaging the “LOCK-OUT”
will not cancel the operating MODE. Engaging the “LOCK-OUT” prevents only the manual
operation of the TRANSMITTER
RECEIVER
The remote receiver operates on 4 AA-size 1.5V batteries. It is recommended that ALKALINE batteries be used for longer battery life
and maximum microprocessor performance. IMPORTANT: New or fully charged batteries are essential for proper operation of the
remote receiver.
The remote receiver houses the microprocessor that responds to commands from the transmitter to control system operation. The
remote receiver has a 3-position slide switch for selecting the MODE of operation: ON/REMOTE/OFF
• With the slide switch in the ON position (toward the LEARN button), the system
will remain on until the slide switch is placed in the OFF or REMOTE position.
• With the slide switch in the REMOTE position (centered), the system will only
operate if the remote receiver receives commands from the transmitter.
• With the slide switch in the OFF position (away from the LEARN button), the
system is off.
• It is suggested that the slide switch be placed in the off position if you will
be away from your home for an extended period of time. If the remote
receiver is mounted out of children’s reach, placing the slide switch in the
OFF position also functions as a safety “lock-out” by both turning the
system off and rendering the remote receiver inoperative.
To Next Page
Loading...
Need help?
Battery
Operating Environment
