EasyManuals Logo

Skytech 5001 User Manual

Skytech 5001
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
_________________________________________________________________________________________
REV 3/23/11 Pg 5 of 5
Skytech 5001
BATTERY LIFE
Life expectancy of the alkaline batteries in the transmitter should be at least 12 months. Check and replace all batteries annually.
When the transmitter no longer operates the remote receiver from a distance it did previously (i.e., the transmitter’s range has
decreased) or the remote receiver does not function at all, the batteries should be checked. It is important that the remote receiver
batteries are fully charged and provides continuous output voltage of a least 5.3 volts. The length of the wire between the remote
receiver and gas valve directly affects the operating performance of the remote system. The longer the wire, the more battery power is
required to deliver signals between the remote receiver and the gas valve. Recommended length is no longer than 20 feet. The
transmitter should operate with as little as 5.3 volts battery power.
TROUBLE SHOOTING
If you encounter problems with your fireplace system, the problem may be with the fireplace itself or it could be with the SKYTECH
remote. Review the fireplace manufacturer’s operation manual to make sure all connections are properly made. Then check the
operation of the SKYTECH remote in the following manner:
Make sure the batteries are correctly installed in the RECEIVER. One reversed battery will keep receiver from operating properly.
Check battery in Transmitter to make sure contacts are touching (+) and (-) ends of battery.
Be sure RECEIVER and Transmitter are within 20 to 25-feet of operating range.
Keep RECEIVER from temperatures exceeding 130
0
F. Battery life shortened when ambient temperatures are above 130
0
F.
If RECEIVER is installed in tightly enclosed metal surround, the operating distance will be shortened.
SPECIFICATIONS
BATTERIES: Transmitter 6V – 4ea. AAA 1.5 Alkaline
Remote Receiver 6V –4ea. AA 1.5 Alkaline FCC ID No.’s: transmitter K9L5001;
Operating Frequency: 303.875MHZ Canadian ISC ID No.’s: transmitter –2439A-5001;
FOR TECHNICAL U.S. INQUIRIES CANADIAN INQUIRIES
SERVICE, CALL: 888/672-8929 or 877/472-3923
260/459-1703
Website: skytechsystem.com
MANUFACTURED EXCLUSIVELY FOR SKYTECH II, INC
FCC REQUIREMENTS
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.

Other manuals for Skytech 5001

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Skytech 5001 and is the answer not in the manual?

Skytech 5001 Specifications

Battery IconBattery
transmitter battery voltage6V
transmitter battery type4ea. AAA 1.5 Alkaline
remote receiver battery voltage6V
remote receiver battery type4ea. AA 1.5 Alkaline
Operating Environment IconOperating Environment
maximum receiver temperature130° F
operating range20 to 25 feet
Communication IconCommunication
operating frequency303.875MHZ
FCC ID No. for transmitterK9L5001
Canadian ISC ID No. for transmitter2439A-5001

Related product manuals