Skywalker X8 - Gluing the Rudder Horns


PHOTO3C

4. GluingtheRudderHorns
Spreadjustenoughglueontothewingscontrolsurfacetoaccepttheruddercontrolhorn.Makesureyou
spreadtheglueevenlyandallowittodry.Dothesameforthecontrolhornitself. Afterboththecontrol
surfaceandcontrolhornhavedried,insertthecontrolhorninto
thepre‐markedholesinthecontrolsurface.
SeePhotos4Aand4B.


PHOTO4A
