Skywalker X8 - Glue the magnetic hold down structure into the wing body

(CA)toaffixthemagnetspermanentlyinthewoodenmagnetholders.Justadropwillbeplentytoholdthe
magnets.SeePhotos2Aand2B.


PHOTO2A


 PHOTO2B

3. Gluethemagneticholddownstructureintothewingbody
Usingthesuppliedglueapplyliberallytothemagneticholddowns,allowthegluetodryforapproximately 5
minutes.Applygluetothewings hatchandfuselagewaitapproximately5minutesforthegluetodry.Afterthe
gluehasdried,payingcloseattentiontotheNorthandSouthpoles
ofthemagnetsinsertthemintothewing