Skywalker X8 - Adding the Wing Butt-Plate to the Main Wing



PHOTO11C


PHOTO11D

12. AddingtheWingButt‐PlatetotheMainWing
Applythesuppliedgluetotheinnerwingedge,makesurenottogetanyglueintothewingtubehole.Also
applygluetothebutt‐plate,allowthegluetodryonbothpiecesforabout5minutes.Afterthegluehasdried
insertthewingtubeintoit
thewingtubecavitytohelpalignthebutt‐plateforthemostaccuratefit.Nextinsert
thewingtubeintothewingtubeholeinthebutt‐plate,andattachthebutt‐platetothewing.