Skywell 5 - Maintenance and Troubleshooting; Cleaning the Air Filter; Cleaning After Power Outage; Detecting Abnormal Circumstance

Note:
The air filter is critical to the Skywell's water quality and quantity. Please
Cleaning the Air Filter
1. Open the fan door by pressing the latch
2. Remove the air filter
3. Rinse the air filter until
water passing
through it comes out clear
4. Shake excess water from the filter
5. Return the filter to its
compartment and
latch the door shut
CLEANING AND CARE (cont.)
1
11
2
3
If you have a question or a problem, please contact
1-844-SKY-WELL(759-9355) or email service@skywell.com for assistance.
contact us if you notice any damage to the air filter.
Cleaning the Skywell After a Power Outage
The Skywell will keep your water fresh and clean and tasting pure as long as there is
power to the unit. If the Skywell is without power for more than 4 consecutive hours:
1. DO NOT drink the water.
2. You must contact a Skywell Certified Technician for service.
3. The Skywell Certified Technician will completely clean the Skywell and return the unit
to its optimal condition.
Detecting Any Abnormal Circumstance
The Skywell generates
fresh, clean and pure tasting water. If, for any reason, you
detect any abnormal circumstance or ozone odor:
1. DO NOT drink the water.
2. You must contact a Skywell Certified Technician for service.
Time Required: 5 minutes
Recommended Frequency: At least weekly
Unit Not Cooling
If the Skywell is not cooling the generated water to below 60 degrees Fahrenheit (15.55
degrees Celsius):
1. DO NOT drink the water.
2. You must contact a Skywell Certified Technician for service.