SPECIFICATIONS
14
SPECIFICATIONS
KEY FEATURES & BENEFITS OF MODEL 2205
1. Pass/fail operation
A programmable limit can be set for pass/fail operation, eliminating operator
judgments. An audio alarm and reject lamp notify the operator of failures.
2. No load setup of trip current and output voltage.
Operators can set output voltage and resistance limits to the desired levels in the
absence of high voltage.
3. Automatic storage of test program.
The instruments will power up with the parameters that were used during the last test
to avoid operator set-up errors.
4. All parameters for the setups can be adjusted through a simple menu driven program.
The easy to follow setup screens ensure that the operator correctly sets up all test
parameters.
5. Line and load regulation.
Tests are more repeatable and reliable, since proper voltage is consistently applied to
all devices being tested, regardless of fluctuations in the line input voltage or the
load created by the device under test.
6. PLC Remote Control.
Inputs and outputs for PLC control are available through a 9-pin D type connector
on the back panel.
7. LED display with meter memory.
Easy-to-read digital display simplifies the task of setting test parameters and
interpreting test results, which reduces errors and makes the operator’s job easier.
Meter memory allows operators to review the last test results.
8. Flashing high voltage indicator.
A flashing LED located to the right of the display clearly indicates when high voltage
is active to provide maximum operator safety.
9. Tamper-resistant front panel design.
Prevents operators from inadvertently or accidentally modifying test parameters and
ensures consistent and reliable test results, minimizing the need for costly and time
consuming product re-testing.
To Next Page
Loading...
