SMA 485 Data Module - 2 Safety; Intended Use

2 Safety SMA Solar Technology AG
6 485i-Module-IA-en-19 Installation Manual
2 Safety
2.1 Intended Use
The 485 Data Module enables the setup of cable-connected RS485 communication for
SMA inverters of type:
The 485 Data Module is only suitable for use with the above mentioned inverter types. The 485 Data
Module is available as a retrofit kit or is pre-installed in the inverter. The inverter still complies with the
standard after the product has been installed.
For safety reasons, it is not permitted to modify the product or install components that are not explicitly
recommended or distributed by SMA Solar Technology AG for this product. Only use the 485 Data
Module in accordance with the information provided in the enclosed documentation. Any other use
can result in personal injury or property damage.
The enclosed documentation is an integral part of this product.
• Read and observe the documentation.
• Keep the documentation in a convenient place for future reference.
Sunny Boy Sunny Tripower Windy Boy
SB 3000TL-20
SB 3600TL-20
SB 4000TL-20
SB 5000TL-20
SB 3000TL-21
SB 3600TL-21
SB 4000TL-21
SB 5000TL-21
SB 6000TL-21
SB 2500TLST-21
SB 3000TLST-21
STP 8000TL-10
STP 10000TL-10
STP 12000TL-10
STP 15000TL-10
STP 17000TL-10
STP 15000TLHE-10
STP 20000TLHE-10
STP 15000TLEE-10
STP 20000TLEE-10
STP 15000TL-30
STP 20000TL-30
STP 25000TL-30
WB 3600TL-20
WB 5000TL-20
WB 3000TL-21
WB 3600TL-21
WB 4000TL-21
WB 5000TL-21