SMA SUNNY BOY 3600TL - Display Messages During the Start-Up Phase

7 Commissioning SMA Solar Technology AG
58 SB30-50TL-21-IA-en-21 Installation Manual
7.2 Display Messages during the Start-up Phase
• The firmware version of the internal processors
appears first in the text line.
• After 5 seconds, or after tapping on the display, the
serial number or the description of the inverter and
the NET ID for communication via Bluetooth will
appear. The designation of the inverter can be
changed via a communication product.
• After a further 5 seconds, or after a further tap, the
configured country standard is displayed
(example: "VDE-AR-N4105-MP").
• After a further 5 seconds, or after a further tap, the
configured language is displayed
(example: "Sprache Deutsch" (Language German).
• During normal operation, the text line of the display will be blank. For possible event messages
that may be displayed in the text line and their meaning, refer to (see Section12
"Troubleshooting", page72) of this document .
Illustrated display messages
The display messages illustrated in this section serve as examples and, depending on the
country setting, may differ from the actual display messages on your inverter.
Showing display messages again
If you want to view the display messages of the start phase again whilst in normal operation,
double-tap the display.
FW PACK XXXX HP XXXX
SN 2100237148 NetIDA
VDE-AR-N4105-MP
Sprache Deutsch