SMA Solar Technology AG 11 Slot for SD Card
Installation Manual SB30-50TL-21-IA-en-21 71
11 Slot for SD Card
The SD card is used to import files if you need to perform a firmware update after consulting the
SMA Service Line.
SMA Solar Technology AG will send you a file with the firmware update by e-mail or on an SD card,
or will make the file available in the download area at www.SMA-Solar.com.
For a description of the firmware update, see the download area at www.SMA-Solar.com.
Properties of the SD card
Use an SD card that is FAT16 or FAT32 formatted and has a maximum storage capacity of
2 GB.
Use the SD card exclusively for this inverter. Do not save any multimedia files or other unsuitable
files on the SD card.
To Next Page
Loading...
