Unpacking and Inspection SMA America, LLC
16 SB50US-80US-IA-en-36 Installation Manual
3 Unpacking and Inspection
Check the delivery for completeness and any visible external damage. Contact your SMA specialty
retailer or SMA if the delivery is incomplete or you find any damage.
If it is necessary to send the Sunny Boy back, use the original packaging.
Contact information is provided in the "Contact" section, page 103.
3.1 Scope of Delivery
* only SB 5000US-12/SB 6000US-12/SB 7000US-12/SB 8000US-12
Position Quantity Description
A1 Sunny Boy
B1 Wall mounting bracket
C 1 Replacement screw and replacement conical spring washers for connecting
the enclosure lid to the Sunny Boy.
2 Screws and washers for fastening the Sunny Boy to the wall mounting bracket
D 2 Spare jumpers for fan test
E 2 Handle covers (left and right)
F3DC varistors*
G 1 Insertion tool for DC varistors*
H1 DC Disconnect
I1Screw and washer for closing the DC Disconnect lid
2 Screws and washers for fastening the DC Disconnect to the wall-mounting
bracket
To Next Page
Loading...
