SMA SUNNY CENTRAL 900CP XT - Parameters and Values for the File Custom.xml

12 Appendix
SMA Solar Technology AG
User ManualSCCPXT-E7-BA-en-58150
Elements of the XML file Explanation
<Info>
<Version>my config V1.01</Version>
</Info>
Required element of the XML file. You must enter
the name and the version for your settings between
the version tags. This information is displayed in the
header of the user interface.
<Config>
<Key>NetworkSettings_DhcpUsage1</Key>
<Value>False</Value>
</Config>
Here, you can set the parameters and their corre-
sponding values (see Section12.3.2, page150).
<Loader>
<Settings>
<PowerFail>2500</PowerFail>
</Settings>
</Loader>
Here, you can set the time period inms which must
expire before the communication unit will shut
down after the UPS of the inverter has signaled a
failure of the supply voltage to the communication
unit. The value must be greater than or equal to
2,500. This setting is immediately adopted once
the file is uploaded.
Example: XML file for setting the Czech language on the user interface
<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<WebBox xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:xsi="http://www.w3.org/2001/
XMLSchema-instance" xsi:noNamespaceSchemaLocation="config_100.xsd">
<Info>
<Version>my config V1.01</Version>
</Info>
<Config>
<Key>NativeSettings_Language</Key>
<Value>cs</Value>
</Config>
</WebBox>
12.3.2 Parameters and Values for the File custom.xml
Parameter Explanation Values Default val-
ues
NetworkSettings_DhcpUsage1 Activates DHCP for LAN2. With the
True value, all other settings of the IP
addresses for LAN2 will be ignored.
True False
False
NetworkSettings_DnsIpAddr1 Sets the first IPv4 address of the DNS
server for LAN2
‒ ‒
0.0.0.0
A valid IPv4
address