SMA SUNNY CENTRAL 900CP XT - Touch Display; Design; Explanation of Symbols

3 Product Overview
SMA Solar Technology AG
User Manual 19SCCPXT-E7-BA-en-58
3.3.2 Touch Display
3.3.2.1 Design
The touch display is used to display instantaneous values and parameter settings. Tapping the symbols on the touch
display activates the corresponding functions. If the touch display has not been touched for five minutes, the display is
locked and the logged-in user will be logged out. By tapping the characters "S", "M" or "A", you can unlock the display
again.
The touch display is divided into three areas.
100
DD.MM.YYYY-hh:mm:ss
A
B
C
Figure 6: Design of the touch display
Position Designation Explanation
A Status info line Number of the active menu, login status and time
B Information field Area of the main menu
C Navigation line Navigation area
3.3.2.2 Explanation of Symbols
Information field
You can access the following sub-menus and screens from the information field:
Symbol Designation Explanation
E-today line graph Diagram 103: Representation of energy fed in during the current day in
kWh.
Bar chart Diagram 104: Representation of energy fed in during the last 14days in
kWh.