SMA SUNNY CENTRAL CP XT Series - 8 Dimensions and Minimum Clearances; Dimensions of the Inverter; Minimum Clearances for Outdoor Installation

8 Dimensions and minimum clearances
SMA Solar Technology AG
Installation ManualSCCPXT-SCS_NR-IA-en-1224
8 Dimensions and minimum clearances
8.1 Dimensions of the Inverter
Mounting the silencing baffle changes the dimensions and safety clearances of the inverter.
910 mm
700 mm
956 mm 2562 mm
2272 mm
152 mm
1307 mm
1204 mm
652 mm
254 mm
Figure 6: Dimensions of the inverter with silencing baffle
8.2 Minimum Clearances for Outdoor Installation
For the optimum operation of the inverter, observe the following points:
☐ The exhaust air vents must not be obstructed or closed.
☐ The exhaust air vents must be accessible for cleaning at all times.
Minimum clearances for one inverter
220 mm
300 mm
1200 mm
300 mm300 mm
Figure 7: Minimum clearances of the inverter